Free Nebraska 2 Template in PDF

Guide to Using Nebraska 2

Filling out the Nebraska 2 form, known officially as the "Notice of Intent to Drill or Re-Enter," is a vital step for operators planning to initiate or revisit an oil, gas, or injection well in Nebraska. This process ensures that all proposed drilling or re-entry activities are transparent and approved by the Nebraska Oil and Gas Conservation Commission prior to commencement. By meticulously completing this form, operators contribute to the safe and regulated exploration of Nebraska's subsurface resources. Follow these steps to ensure the accurate and complete submission of the form:

1. Identify the type of work by selecting "Drill," "Re-enter," or "Drill Horizontal or Directional Well."
2. Specify the type of well as either "Oil," "Gas," or "Injection."
3. Enter the operator's telephone number and address.
4. Provide the name of the lease, the well number, and if applicable, the field and reservoir. If the project is a wildcat, clearly state this.
5. Record the elevation of the ground at the well location.
6. Detail the well location in the county by specifying the quarter-quarter section, section, township, and range. Include the exact surface location of the well in feet from the nearest exterior section lines.
7. If the well is directionally drilled, describe the bottom hole location by reporting the distance from the exterior section lines, similar to the surface location instructions.
8. Provide the latitude and longitude of the surface location in degrees.
9. State the nearest distance from the proposed location to the nearest property or lease line.
10. Indicate the number of acres in the lease, the distance from the proposed location to the nearest drilling, completed, or applied for the well on the same lease, and the total number of wells on the lease, including the one intended for work.
11. List the proposed measured depth and true vertical depth in feet, along with the deepest formation to be penetrated.
12. Estimate the approximate start date for the drilling or re-entry and provide details of the drilling contractor.
13. Outline the proposed casing and cementing program, including the purpose of each string, hole and casing sizes, weight, grade, setting depths, cement volume, and type, as well as the estimated top of cement.
14. Indicate the status of the bond, choosing between a $5,000 "One Well" Bond or confirming a $25,000 Blanket Bond is on file.
15. Sign the form as the operator or agent, ensuring to include the date of signature.
16. If applicable, check whether a cut sample is required by the Nebraska Geological Survey and whether a survey plat and Form 2A (Permit Application for a Temporary Earthen Reserve Pit) are attached.

After completing all the necessary information, make sure to include the requisite fee with your form. The thorough and precise submission of these documents facilitates a smoother approval process, advancing your project from planning to reality while adhering to regulatory standards.

What is the Nebraska 2 form used for?

The Nebraska 2 form, known as the Notice of Intent to Drill or Re-Enter, is a required document for any operator planning to begin drilling, re-entering, or creating a horizontal or directional well in the state of Nebraska. This form serves as a formal notification to the Director of the Nebraska Oil and Gas Conservation Commission, seeking approval before proceeding with the said operations. It ensures that all oil, gas, and injection well activities comply with state regulations, safeguarding both environmental and public interests.

Who needs to fill out the Nebraska 2 form?

Operators who intend to drill a new well, re-enter an existing well, or drill a horizontal or directional well within Nebraska must complete the Nebraska 2 form. This requirement applies to wells for oil, gas, and injection purposes. It is the responsibility of the operator or their authorized agent to submit this form to the Nebraska Oil and Gas Conservation Commission for approval before commencing any of the mentioned activities.

What information is required on the Nebraska 2 form?

The Nebraska 2 form mandates the provision of detailed information regarding the planned well operations, including:

• Type of work (drill, re-enter, drill horizontal or directional well)
• Type of well (oil, gas, injection)
• Operator's contact details
• Name of lease, well number, field, and reservoir
• Well location and bottom hole location, including latitude and longitude of the surface location
• Details on the distance from the proposed location to property or lease lines, and nearest existing wells
• Proposed depths and the deepest formation to be penetrated
• Planned drilling contractor and proposed casing and cementing program
• Status of bond (either "One Well" bond or blanket bond)

This comprehensive information aids in the evaluation and approval process, ensuring all proposed well activities meet regulatory standards.

Is there a fee associated with the Nebraska 2 form submission?

Yes, submitting the Nebraska 2 form requires a fee. Although the document does not specify the amount, operators are advised to include the requisite fee along with their submission. This fee covers the processing and review of the notice of intent. Operators can find the exact fee amount and payment instructions on the Nebraska Oil and Gas Conservation Commission’s official website or by contacting the commission directly.

What additional documents must accompany the Nebraska 2 form?

Alongside the Nebraska 2 form, operators must submit several supplemental documents, which include:

1. A survey plat for the location, detailing the proposed drilling or re-entry site.
2. Form 2A, the Permit Application for a Temporary Earthen Reserve Pit, if applicable to the operation.
3. Proof of the required bond status, whether a $5,000 "One Well" Bond or a $25,000 Blanket Bond, depending on the operator’s activities and coverage needs.

These additional documents help provide a comprehensive view of the planned drilling or re-entry operation, ensuring all aspects adhere to state regulations and guidelines.

Filling out the Nebraska 2 form, which is necessary for notifying the intent to drill or re-enter a well, is a vital step in the oil and gas production process in Nebraska. However, applicants often make mistakes that can delay approval. Understanding these common errors can streamline the process.

1. Incorrect or Incomplete Well Location Information: One common error is providing inaccurate or incomplete information regarding the well's surface and bottom-hole locations. Applicants must report the location from the exterior section lines with precise footage. Additionally, the latitude and longitude of the surface location must be accurately given, ensuring that all measurements are exact to avoid processing delays.

2. Failure to Specify the Type of Work and Type of Well: On the form, applicants must clearly indicate whether the work involves drilling, re-entering, or creating a horizontal or directional well. Additionally, specifying the well type (oil, gas, or injection) is mandatory. Overlooking these selections can lead to misunderstandings about the project's nature and requirements, potentially causing setbacks.

3. Omission of Casing and Cementing Program Details: Another mistake is omitting details about the proposed casing and cementing program. The form requires information such as purpose of string, hole size, casing size and grade, setting depth, and cement volume and type. This data is crucial for assessing the well's design and integrity, so incomplete sections can result in requests for additional information or outright rejection.

4. Neglecting to Attach Required Documents and Fees: Lastly, applicants sometimes forget to attach the necessary $5,000 “One Well” Bond or evidence of a $25,000 Blanket Bond on file, along with the required fee and survey plat for the location. Additionally, if applicable, Form 2A for a temporary earthen reserve pit must be included. Overlooking these requirements can halt the approval process until the necessary documentation and payments are submitted.

Avoiding these common mistakes when filling out the Nebraska 2 form can significantly ease the application process. Accuracy, completeness, and attention to the requirements ensure a smoother path to obtaining the necessary approvals for drilling or re-entering a well in Nebraska.

In navigating the intricacies of oil and gas operations within Nebraska, several documents and forms often complement the Nebraska 2 form, each playing a vital role in ensuring compliance and successful project execution. From initial applications to essential notifications and operational plans, these documents collectively facilitate a streamlined process for the approval and oversight of drilling activities. Understanding each document's purpose can significantly enhance the efficiency and compliance of operations.

• Form 2A - Permit Application for a Temporary Earthen Reserve Pit: This is often filed alongside the Nebraska 2 form. It seeks approval for constructing and using a temporary pit that holds drilling-related fluids or waste on site.
• Form 1 - Application for Permit to Drill: Submitted prior to the Nebraska 2, this form officially requests permission to commence drilling operations.
• Form 4 - Monthly Production and Disposal Report: Required monthly report that tracks the volume of oil, gas, and water produced or disposed of, ensuring proper resource management and environmental compliance.
• Form 9 - Notice of Intention to Abandon a Well: Submitted when an operator plans to cease the use of a well, outlining the methods for safely abandoning it in accordance with regulatory standards.
• Environmental Impact Assessment (EIA): While not a form, this comprehensive report evaluates the potential environmental impacts of the proposed drilling activities, often required to support applications.
• Well Completion Report: A detailed account of the well construction, geological findings, and initial production data submitted after drilling is completed.
• Lease Agreements: Contracts between the mineral rights holder and the drilling company, granting the latter permission to explore and extract resources.
• Land Survey Plats: Detailed drawings that specify the exact location of the well and relevant infrastructure, relative to property lines and natural features.
• Emergency Response Plan (ERP): A document outlining procedures and responsibilities to handle potential emergencies or accidents, ensuring worker safety and environmental protection.
• Form 5 - Well Log: Submitted after drilling, this form provides a detailed record of the geological formations encountered during drilling, including rock types and the presence of oil, gas, or water.

Together, these documents form a comprehensive suite of requirements that operators must navigate to achieve compliance and operational success in Nebraska's oil and gas sector. By meticulously preparing and submitting each required document, operators can ensure their projects proceed smoothly, within the framework of state regulations and environmental considerations. Understanding the scope and purpose of each document is essential for anyone involved in this sector, from legal professionals to operators and contractors.

The Nebraska 2 form, specifically designed for notifying the intent to drill or re-enter a well, bears resemblance to several other pivotal documents within the regulatory landscape of oil and gas exploration. Its comprehensive approach in outlining the specifics of proposed drilling operations, from operator information to detailed well location data, and proposed casing and cementing programs, mirrors the structuring and intent behind these comparative documents, albeit with a focus tailored to Nebraska's regulatory requirements.

The Application for Permit to Drill (APD) forms used by various states share a significant similarity with the Nebraska 2 form in terms of purpose and content. Like the Nebraska form, APDs formally request permission to drill or modify an existing oil or gas well, requiring detailed information about the well's location, the nature of the proposed drilling operation (whether it's a new drill, re-entry, or modification), and specifics about drilling processes. Both sets of documents mandate the submission of operational plans, including the casing and cementing program and the projected depths of drilling. They also call for environmental and safety measures to be clearly stated, reflecting a shared emphasis on regulatory oversight and environmental protection.

Form 2A, Permit Application for a Temporary Earthen Reserve Pit, required alongside the Nebraska 2 form for certain operations, offers another point of comparison, albeit with a narrower focus. Form 2A details the specifications for constructing and managing temporary pits used in drilling operations, emphasizing containment and environmental safety measures. While the Nebraska 2 form captures a broad scope of drilling operation details, Form 2A hones in on this specific aspect of site preparation and management, illustrating the complementary nature of these documents in the regulatory process. The parallels lie in their collective aim to oversee and mitigate the environmental impacts of drilling activities, with each form addressing different facets of the operation’s environmental stewardship.

When filling out the Nebraska 2 form, which is the Notice of Intent to Drill or Re-Enter, there are certain practices to follow for a smooth process. Below are key do's and don'ts to consider:

• Double-check all information: Ensure that every detail entered on the form is accurate and matches the supporting documents. Mistakes can cause delays.
• Include all required attachments: Attach the $5,000 “One Well” Bond or confirm the $25,000 Blanket Bond is on file, include the survey plat for the location, and remember Form 2A for a Temporary Earthen Reserve Pit if applicable.
• Provide clear and detailed well location: The form requires specific details about the well's surface and bottom hole locations, including measurements from section lines and latitude and longitude coordinates. Precision is key.
• Sign and date the form: An unsigned form is incomplete. Make sure the operator or agent signs the form and fills in the date to verify the information provided.

• Submit without reviewing: Before sending the form to the Nebraska Oil and Gas Conservation Commission, review every section to ensure completeness and accuracy. Skipping this step can lead to unnecessary corrections.
• Forget to indicate the type of work: Clearly mark whether the intent is to drill, re-enter, or drill horizontally/directionally. This affects how your application is processed.
• Leave sections blank: If a section does not apply, indicate this with “N/A” rather than leaving it empty. This shows that you have acknowledged every part of the form.
• Assume approval: Just because you’ve submitted the form doesn’t mean you can begin work. You must wait for approval from the Commission before proceeding.

When it comes to submitting the Nebraska Oil and Gas Conservation Commission Form 2, there are several misconceptions that can lead to misunderstandings or errors in the process. This form, crucial for notifying the Commission about intentions to drill or re-enter a well, must be filled out with care and precision. Here are seven common misconceptions about the Nebraska 2 form:

• Misconception #1: Any copy of the form is sufficient for submission. This is incorrect because only the original form should be submitted for processing. The Commission itself will handle the reproduction of copies as required.
• Misconception #2: Approval from the Director is not necessary before starting work. In reality, notice must be given, and approval obtained from the Director before proceeding with the work described in the form.
• Misconception #3: The form is only for drilling new wells. This is not the case, as the form also covers re-entering an existing well or drilling horizontal or directional wells, indicating the form's scope goes beyond just the drilling of new oil or gas wells.
• Misconception #4: The bond status is not a crucial part of the form. On the contrary, stating whether a $5,000 "One Well" Bond is attached or if there is a $25,000 Blanket Bond on file is mandatory, highlighting the importance of the bond status in the application process.
• Misconception #5: Latitude and longitude details of the well location are optional. This information is essential, as it precisely identifies the surface location of the well to be drilled or re-entered, ensuring accuracy in the well's location on regulatory and survey maps.
• Misconception #6: The proposed casing and cementing program is secondary and doesn't need detailed attention. The truth is, outlining the purpose of the string, hole size, casing size, weight, grade, setting depth, cement volume, and type is critical for ensuring the well's integrity and compliance with environmental and safety standards.
• Misconception #7: Submission without the requisite fee, survey plat, and Form 2A is acceptable. In actuality, these components are required as part of the notice. Failing to include them can lead to delays or rejection of the application, as they provide necessary details and financial assurance for potential environmental impact management.

Understanding these misconceptions and ensuring accurate, complete submissions help streamline the approval process for drilling or re-entering wells in Nebraska. Compliance with the Nebraska Oil and Gas Conservation Commission's requirements not only facilitates regulatory approval but also supports responsible resource management and safety practices in the state's oil and gas sector.

Filling out and using the Nebraska 2 form, officially known as the Notice of Intent to Drill or Re-Enter, requires attention to detail and an understanding of its various sections. The goal is to ensure you meet all procedural requirements set by the Nebraska Oil and Gas Conservation Commission (NOGCC). Below are key takeaways to guide you through this process efficiently:

• Submit the Original: Only the original form needs to be submitted. The NOGCC takes responsibility for reproducing any necessary copies.
• Early Notification: Both the Director and the NOGCC must be notified and must approve your intent to drill or re-enter a well before any work begins. This is crucial for compliance and planning.
• Type of Work: Clearly specify the type of work intended, whether drilling, re-entering, or drilling horizontal or directional wells. This informs the scope and nature of the project at hand.
• Type of Well: Indicating whether the well is for oil, gas, or injection is essential for the NOGCC’s understanding of your project’s purpose and the regulatory requirements it must fulfill.
• Location Details: Provide detailed information about both the surface and bottom hole locations, including footage from section lines and latitude/longitude coordinates. Precision here is vital for environmental, regulatory, and neighborly considerations.
• Proximity Considerations: Reporting the nearest distance to property or lease lines, as well as the distance to nearest existing wells, is necessary for regulatory compliance, safety, and efficient resource management.
• Drilling Details: Details such as proposed measured and true vertical depths, the deepest formation to be penetrated, and the approximate start date, offer a clear overview of the drilling project's scale and timetable.
• Proposed Casing and Cementing Program: Outlining your plans for casing size, weight, grade, setting depth, as well as cement volume and type, ensures well integrity and environmental protection.
• Financial Assurance: The form requires information on the status of a bond—either a $5,000 “One Well” Bond or a $25,000 Blanket Bond. This financial assurance is crucial for ensuring that operators can cover the cost of well closure and site reclamation.

Completing the Nebraska 2 form with all the required details not only aligns with regulatory requirements but also plays a part in safeguarding the environment and community interests. Every piece of information requested on the form serves a purpose, whether it's for operational transparency, safety, environmental protection, or regulatory compliance. Paying close attention to these details can make the process smoother for operators and contribute to a well-regulated oil and gas sector in Nebraska.